August 31, 2004

Linksys Blue Box Router HOWTO

Linksys Blue Box Router HOWTO: "There are three ways you can upgrade your Linksys firmware."

The third way is to use tftp. This is how I did it. There is a tftp client included with Red Hat Linux. To upgrade your firmware this way, do the following steps:

Capture a copy of your settings. The firmware upgrade may wipe some of them. Older versions nuked everything back to factory defaults; newer versions preserve your basic settings but clear some advanced ones.

Download a copy of the new firmware. You should find it at Firmware Upgrades for your Linksys Products on the Linksys site. Note that what you get may well be marked "For Windows Users" and be a zip archive. Open it in a scratch directory, because it will rudely create several Windows files wherever you unpack it. The file you need will be called CODE.BIN.

Disable the router password Note that every attempt I made to do this with Mozilla failed (both under 1.38 and 1.44). Konqueror worked fine. Go to the Password tab, backspace over both sets of asterisks until both the Password and Confirm fields are blank, and click Apply.

Cross your fingers and load the firmware The command session you want will to see will look something like this, with your router's IP address substituted for

tftp> binary
tftp> put code.bin
Sent 386048 bytes in 10.3 seconds

Don't panic if the client hangs for a bit before returning and do not abort the transfer. The command is writing to firmware, and the Linksys hasn't got much of a brain. Wait for it to finish.

Re-enable your router password and other settings. You'll be able to tell the upgrade worked because the firmware version number has changed.

You're done.

August 26, 2004

Wichita Macromedia User Group

Wichita Macromedia User Group

August 17, 2004

ADSI COM code for CFMX

ADSys = createObject("COM", "ADSystemInfo");
UserName = ADSys.UserName;

<cfdump var="#UserName#">

CFMX QuotedValueList

I found out today that if you are going to use #quotedvaluelist()# in a query that you have to use it in the query and not set it as a variable before hand.


FROM table
WHERE something NOT IN (#quotedvaluelist(query.column)#)


FROM table
WHERE something NOT IN (#varname#)

The bad example escapes the single quotes once it is used in the query. Not fun.

August 4, 2004

Adding additional file types to verity on CFMX 6.1

Verity content-type handling is done with the style.uni file. Each collection has its own style.uni file for both file and custom collection types.

The style.uni file can be found in:


You can modify the default style.uni files so that any new collections will have the new settings.

These default files are found under:

The easiest way to add new file types is to change the default setting at the bottom of the page.
# /action = skip
/charset = guess - True Random Number Service - True Random Number Service